enarsi 300-410

enarsi 300-410

• 5356 Reviews

By default, port security is disabled; however, this feature can be enabled using the switchport port-security [mac-address {mac-address} [vlan {vlan-id Router(dhcp-config)#network 192.168.1.0 255.255.255.0 Topology Switch1(config-if)#exit Switch1(config)#no lldp ? run Enable LLDP Switch1(config)#no lldp run Having ports in VLAN 1 is considered a security vulnerability which allows hackers to gain access to network resources. To mitigate this problem, it is advisable to avoid putting any hosts into VLAN 1. You can also change the native VLAN on all trunk ports to an unused VLAN: DHCP Server Identifier: the DHCP server IP address (192.168.1.1) All of the options configured on the router: Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1) Take today’s exam The shutdown VLAN option is similar to the shutdown option; however, this option shuts down a VLAN instead of the entire switch port. This configuration could be applied to ports that have more than one single VLAN assigned to them, such as a voice VLAN and a data VLAN, as well as to trunk links on the switches. Port Vlans allowed on trunk Fa0/1 1,10,20,enarsi 300-410,30,40,50 Switch(config-if)#switchport trunk encapsulation dot1q Switch(config-if)#switchport mode trunk Switch(config-if)#switchport nonegotiate Switch(config-if)#exit Switch(config-if)#switchport nonegotiate Switch(config-if)# Day 12 Tasks Instructions Maximum path: 4 ------------------------------------------------------- 3.Ping from R2 to R1 or vice versa. Administrative Mode: dynamic desirable Operational Mode: trunk Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: dot1q Negotiation of Trunking: On DHCP Clients on Cisco Routers Topology via FE80::C004:8FF:FE2F:0, FastEthernet0/0 Now take a look at the results of this change on the network: R1(config-if)#router rip Switchport: Enabled Day 11 Tasks 3.Configure a trunk link between the switch and router using dot1q. communicate only with routers in the same domain or area. This reduces the amount of information that routers in the domain or area must process, which allows for faster convergence within the network. Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B – BGP, D - EIGRP, EX - EIGRP external, O - OSPF, When configuring routing on your network devices, you have to carefully configure static or dynamic routing based on the design. If you have a problem and are not able to send/receive traffic across the network, then you probably have some kind of configuration issue. When you initially set up a router there will most likely be some type of configuration problem that you will have to troubleshoot. If the router has been running for a while and you suddenly have a complete failure of traffic (no communication), you should analyze the situation and figure out whether the routing protocol functions as expected.

Free Download Dumps Demo & Study Tools

Latest CCNP Enterprise 300-410 ENARSI Dumps 

The best accurate dumps in the world! 300-410 dumps are the most stable and latest in PASSHOT. We have many work experience and help many students passed the exam. The one we can sure that we can help you pass the exam 100 %.