CCNA Classroom Streamlined Notes (1)

The three-tier architecture of the network:

1. Access layer: Provide network access points, the corresponding device ports are relatively dense. Main equipment: switches, hubs.

2. Convergence layer: The aggregation point of the access layer can provide routing decisions. Implement security filtering, flow control, remote access. Main equipment: Router.

3. Core layer: Provide faster transfer speed, do not do any operation on the packet 

============================== =============================================

OSI seven-layer network model: Protocol data unit

1. Physical layer: Rate, voltage, pin interface type Bit

2. Data link layer: Data error detection, physical address MAC Frame

3. Network layer: routing (path selection), logical address (IP) Packet

4. Transport layer: reliable and unreliable transport services, retransmission mechanism. Segment

5. Session layer: Differentiate data from different applications. The operating system works on this layer. DATA

6. Presentation layer: Implement data encoding, encryption. DATA

7. Application layer: User interface DATA

Bit, Frame, Packet, and Segment are all called: PDU (Protocol Data Unit) 

================================ ==================================

Physical layer:

1. Media type: twisted pair, coaxial cable, fiber

2. Connector type: BNC interface, AUI interface, RJ45 interface, SC/ST interface

3. The twisted pair transmission distance is 100 meters.

4.HUB Hub: A broadcast domain, a collision domain. Flooding forwarding. Sharing bandwidth.

Straight line: Host to switch or HUB connection

Crossover: switches and switches, switches and HUB connections

Rollback: Used to manage CISCO network devices. 

================================= ==================================

data link layer: 

Switch and bridge

2. How many collisions are there in the segment (port) of the switch and bridge.

3. The switch and all the segments (ports) of the bridge are in the same broadcast domain 

================================== =================================

Network layer: 

Router

2. Routing implementation path selection (routing decision). Routing Table

3. WAN access.

4. Division of the broadcast domain of the router (interrupted). 

================================================ ===========================

Transport layer:

1.TCP (Transmission Control Protocol), connection-oriented, with retransmission mechanism, reliable transmission

2. UDP (User Message Protocol), no connection, no retransmission mechanism, unreliable transmission

3. Port number: Provides the session layer to distinguish data without application. Identity service. 

=============================== ============================================

Show hosts show current hostname configuration

Show sessions show current outbound TELNET sessions

Clear line XXX Clear line

Enable enter privileged mode

Disable returns from privileged mode to user mode

Configure terminal enters global configuration mode

Interface ethernet 0/1 enters Ethernet port number 1 of slot 0

Exit returns to the upper mode

End returns directly to privileged mode 

===================================================== ======================

1. When the CISCO CATALYST series switch does not find the "User Configuration" file during initialization, it will automatically load the Default Settings file to initialize the switch to ensure the switch works normally.

2. When the CISCO Router does not find the "User Configuration" file during initialization, the system will automatically enter the "Initial Configuration Mode" (System Configuration Dialog Mode, SETUP Mode, STEP BY STEP CONFIG Mode, Standby Mode), which will not work properly! 

=========================================================== ===============

1.CONSOLE PORT (management console interface): Distance limit, exclusive mode.

2. AUX port (auxiliary management interface): You can mount MODEM to achieve remote management, exclusive mode.

3. Telnet: multi-person remote management (depending on performance, number of VTY lines). Not safe. 

============================== =============================================

Execute immediately, take effect immediately 

====================================================== =====================

Hostname Configure host local ID

R6(config)#interface ethernet 0

R6(config-if)#ip address 1.1.1.1 255.255.255.0

Show version Observe IOS version Device working time Related interface list

Show running-config View the currently active configuration This configuration file is stored in RAM

Show interface ethernet 0/1 View the status of the Ethernet interface, etc., etc... 

=============================== ============================================

Reload reload the Router (restart)

Setup Manually enter setup configuration mode

Show history View history commands (commands that have just been used recently)

Terminal history size

Copy running-config startup-config save the current configuration

Concept:

Nvram : Non-volatile memory, power-off information will not be lost <-- User configuration <-- startup-config

Ram : Random access memory, power failure information is lost <-- Currently effective configuration <-- running-config

Startup-config will actively load each time the router or switch is started 

=================================== ================================

Banner motd [char c] also ends with [char c]

Description description interface comment

(

Configure a password for the console port:

Line conosle 0 Go to consolo 0

Password cisco set a password to "cisco"

Login set password when using login

Enable password

Enable secret

Service password-encryption Encryption system all plaintext passwords (weak)

Set vtp line password (Telnet)

Line vty 0 ?

Password cisco

Login 

========================================================== ================

Configure a virtual loopback interface. The loopback interface is in the UP state by default.

Inerface loopback ? Create a loopback interface

Ip address 1.1.1.1 255.0.0.0 Configuring the IP address of the interface

End exit the interface

Ping 1.1.1.1 Checking the validity of the interface

No * do the reverse operation of the configuration

DCE/DTE only exists in the WAN

Show controllers serial 0 for viewing

DCE and DTE attributes DCE routers need to be configured with clock frequency

Clock rate ? Configure the clock frequency of the DCE interface (system specified frequency) 

============================================= ==============================

Serial1 is administratively down, Line protocol is down

The port is not activated with the no shutdown command

Serial1 is down, Line protocol is down

1. The other party does not have no shutdown to activate the port.

2. The line is damaged and the interface does not have any connecting cables.

Serial1 is up, line protocol is down

1. The other party is not configured with the same Layer 2 protocol serial interface default encapsulation: HDLC

2. There may be no configured clock frequency

Serial1 is up, line protocol is up

The interface works normally 

======================================================== ==================

Show cdp neighbors View CDP neighbors (without IP)

Show cdp neighbors detail View CDP neighbors (including Layer 3 IP addresses)

Show cdp entry * View CDP neighbors (including Layer 3 IP addresses)

R1(config)#no cdp run Turns off the CDP protocol in global configuration mode (affects all interfaces)

R1(config-if)#no cdp enable Turn off the CDP protocol on the interface (only affects the specified interface)

Clear cdp table Clear CDP neighbor table

Show cdp interface serial 1 View the CDP information of the interface 

================================================ ===========================

Sending CDP packets every 60 seconds (send cdp packets every 60 seconds)

HoldTime 180 seconds (the information for each CDP is saved for 180 seconds)

Recommend PASSHOT for everyone, this is a website with a lot of articles about Cisco technology, and if you want to test Cisco CCIE Written exam or Cisco CCIE LAB exam, you can consult here, you can guarantee 100% pass the exam.